Home > Tool Steel > Steel OCR12SP (Mat.No. 1.2436, DIN X210CrW12)

Steel OCR12SP (Mat.No. 1.2436, DIN X210CrW12)

We can produce Steel OCR12SP (Mat.No. 1.2436, DIN X210CrW12) stainless steel round rods, Steel OCR12SP (Mat.No. 1.2436, DIN X210CrW12) forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control Steel OCR12SP (Mat.No. 1.2436, DIN X210CrW12) chemical composition and Steel OCR12SP (Mat.No. 1.2436, DIN X210CrW12) mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.

Production specification

Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.

Steel OCR12SP (Mat.No. 1.2436, DIN X210CrW12)
Steel OCR12SP (Mat.No. 1.2436, DIN X210CrW12)

Designation by Standards

Brand Name	LH No.	Mat. No.	DIN	EN	AISI
OCR12SP	815	1.2436	X210CrW12	X210CrW121	-

Chemical Composition (in weight %)

C	Si	Mn	Cr	Mo	Ni	V	W	Others
2.12	0.25	0.45	12.00	-	-	-	0.70	-

Description
Ledeburitic chromium steel with high durability and cutting performance; low distortion on hardening.

Applications
Cutting tools for sheet metal thicknesses up to approximately 2 mm, paper blades,stone compression moulds, section rolling-mill rolls, deep-drawing tools.

Physical properties (avarage values) at ambient temperature
Modulus of elasticity [10³ x N/mm²]: 210
Density [g/cm³]: 7.77
Thermal conductivity [W/m.K]: 20.0, 20.5 (at 350^oC), 24.1 (at 700^oC)
Electric resistivity [Ohm mm²/m]: 0.65
Specific heat capacity[J/g.K]: 0.46

Coefficient of Linear Thermal Expansion 10^-6 ^oC^-1

20-100^oC	20-200^oC	20-300^oC	20-400^oC	20-500^oC	20-600^oC	20-700^oC
10.8	11.8	12.4	12.5	12.8	12.9	13.0

Continuous Cooling Transformation (CCT) Diagram

Soft Annealing
Heat to 800-840^oC, cool slowly in furnace. This will produce a maximum Brinell hardness of 255.

Stress Relieving
Stress relieving to remove machining stresses should be carried out by heating to 650^oC, holding for one hour at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.

Hardening
Harden from a temperature of 940-980^oC followed by air,oil quenching or warm bath quenching 500-550^oC. Hardness after quenching is 64 HRC.

Tempering
Tempering temperature: See the data bellow.

Tempering Temperature (^oC) vs. Hardness (HRC)

100^oC	200^oC	300^oC	400^oC	500^oC	600^oC
63	62	60	58	56	48

Forging
Hot forming temperature: 1050-850^oC.

Machinability
The machinability rating of OCR12SP is roughly 20-25% that of free machining carbon steel 1018. Due to its abrasion resistant nature, machining in the hardened condition should be limited to finish grinding.

Forms manufactured: Please see the Dimensional Sales Program.

Mechanical properties

Steel OCR12SP (Mat.No. 1.2436, DIN X210CrW12) Mechanical properties,Our production completely according to the Steel OCR12SP (Mat.No. 1.2436, DIN X210CrW12) standards to meet the Steel OCR12SP (Mat.No. 1.2436, DIN X210CrW12) mechanical performance, can also according to the customer request, to meet the requirements of customers of Steel OCR12SP (Mat.No. 1.2436, DIN X210CrW12) mechanical properties.

Heat treatment

Steel OCR12SP (Mat.No. 1.2436, DIN X210CrW12) Heat treatment,Our production completely according to the Steel OCR12SP (Mat.No. 1.2436, DIN X210CrW12) standards to meet the Steel OCR12SP (Mat.No. 1.2436, DIN X210CrW12) Heat treatment, can also according to the customer request, to meet the requirements of customers of Steel OCR12SP (Mat.No. 1.2436, DIN X210CrW12) Heat treatment.

Machining

Steel OCR12SP (Mat.No. 1.2436, DIN X210CrW12) Machining,Our production completely according to the Steel OCR12SP (Mat.No. 1.2436, DIN X210CrW12) standards to meet the Steel OCR12SP (Mat.No. 1.2436, DIN X210CrW12) Machining, can also according to the customer request, to meet the requirements of customers of Steel OCR12SP (Mat.No. 1.2436, DIN X210CrW12) Machining.

Welding performance

Steel OCR12SP (Mat.No. 1.2436, DIN X210CrW12) Welding performance,Our production completely according to the Steel OCR12SP (Mat.No. 1.2436, DIN X210CrW12) standards to meet the Steel OCR12SP (Mat.No. 1.2436, DIN X210CrW12) Welding performance, can also according to the customer request, to meet the requirements of customers of Steel OCR12SP (Mat.No. 1.2436, DIN X210CrW12) Welding performance.

Prev:1.2842 90MnCrV8 Tool Steel
Next:Steel CRV

ENQUIRY: Steel OCR12SP (Mat.No. 1.2436, DIN X210CrW12)